1. Prepare your NAS device and make sure you can access it
2. Mount your NAS device as a drive
   • From Finder: APPLE + K
   • Server Address: smb://NAS-Device
   • Select which folder you want mounted.  In my case it was called “Back Up”
3. Open up Terminal and Prepare Time Machine to use the network drive mounted above by typing:
   defaults write com.apple.systempreferences TMShowUnsupportedNetworkVolumes 1
4. Create an empty disk image that will be used on the NAS device to contain your Time Machine backup by typing:
   hdiutil create -library SPUD -megabytes 400000 -fs HFS+J -type SPARSEBUNDLE -volname “backup” “backup.sparsebundle”
   • This creates the empty sparse bundle disk image of a size of 400 Gigabytes
   • It also creates a volume name of “backup” and the file name of “backup.sparsebundle”
5. Move “backup.sparsebundle” to your NAS device location
6. Open up the Console application.  I have yet to figure out a better way to do this, but we have to start a Time Machine backup and let it fail in order to name the “backup.sparsebundle” file that was moved to the NAS device properly because Time Machine is unable to requisition the name properly.  The Console application will contain the appropriate name.
7. Open up your Time Machine Preferences
8. Click “Change Disk” and select your the mounted drive
9. Start a backup (it will fail)
10. In the Console application click on “All Messages”
11. Look for text that reads something like: /System/Library/CoreServices/backupd[8818] Creating disk image /Volumes/Backup-1/Joe User’s MacBook Pro 15″_0016cbc9be62.sparsebundle
12. Copy this line to your favorite text editor
13. Go into your NAS device and rename the file to “Joe User’s MacBook Pro 15″_0016cbc9be62.sparsebundle” (replacing it to your exact text…of course <grin>)
14. Stop the backup if you haven’t already or if it hasn’t failed yet
15. Restart the backup
16. You should see Time Machine accepting the sparsebundle and it should properly backup

Some Caveates and cleanup items:

1. It will take a long time for the initial backup to finish, so it’s a good idea to run this over night.
2. The Sparsebundle name must be exactly as you find it in the console.  I’ve not found a better way yet to retrieve the drive name that it is looking for.
3. Delete the original “backup.sparsebundle” file from your local harddrive
4. It may be a good idea to clear the Console logs before starting the Time Machine backup the first time through, it’ll make finding the proper drive name a little easier.
5. If you’ve gone through these steps and it’s still not working reset the Time Machine defaults: defaults write com.apple.systempreferences TMShowUnsupportedNetworkVolumes 0. And then go through the steps again.
6. I chose a 400 gig sparsebundle file because the harddrive size was close to 375 gigs.

Hopefully you’ll find as much success as I have with this process.  I’ll be updating this posting soon with actual screenshots to help make it clearer.

I knew from the start that I had the .NET 2.x framework on my machine already, which was a plus. I also knew that I had to install IIS because the solution is web based. So that was easy enough.

I installed the solution, configured it according to the documentation, and attempted to run it through a browser. <BAM>”Failed to access IIS metabase.” error was triggered. Digging way back into the recesses of my memory, I did recall something about this (something about running a command), but again my memory is slightly outdated. Thankfully having full access to the internet provided me the solution.

c:\<path to .NET Framework version root>\aspnet_regiis -i

Give Credit where Credit is due:

http://blog.devstone.com/Aaron/archive/2006/05/08/1586.aspx

Perhaps I’ve been doing development too long because I could not remember for the life of me how to get around this problem. After a few quick searches I was reminded of the the syntax “\\.\” and this solved my problem. I wanted to remove everything from the root folder of the application.

To remove folders and files:

ex. rd “\\.\c:\Path to long directory” /s /q

To removefiles

ex. del “\\.\c:\Path to file”

Give credit where credit is due:

1. My good friend Jeremy Simmons
2. Microsoft Support
3. Where my memory was jogged: IT News Group.NET which is simply an alias to: microsoft.public.windows.server.general